|
|
|
| MODEL SERIES | STYLE |
CLASS |
| 2000 | DOUBLE HUNG/FIXED HOR SLIDER/FIXED |
RESIDENTIAL RESIDENTIAL |
| 3000 | SINGLE HUNG/FIXED HOR SLIDER/FIXED |
RESIDENTIAL RESIDENTIAL |
| 2000C | DOUBLE HUNG//FIXED |
COMMERCIAL |
| 3000C | SINGLE HUNG//FIXED |
COMMERCIAL |
| FEATURE | FUNCTION |
BENEFITS |
| COMPETITIVE PRICING | MATCHING PRICES FOR EQUIVALENT QUALITY & PERFORMANCE WINDOWS |
|
| HIGH PERFORMANCE RATINGS | CONFORM WITH STRUCTURAL, WATER & AIR REQUIREMENTS OF THE GOVERNING AAMA & ASTM SPECIFICATIONS |
|
| THERMAL PERFORMANCES | INCREASED WITH LOW E-GLASS & ARGON GLAZED SASH ESTABLISHED BY NFRC TESTING |
|
| CUSTOM MANUFACTURED | WINDOW SIZES CONFORM WITH OPENING MEASUREMENTS |
|
| SPECIAL J-CHANNEL NAILING FLANGE | JOINS WITH SIDING IN NEW CONSTRUCTION INSTALLATIONS |
|
| LOW CONDUCTIVITY VINYL MATERIAL | COMBINATION OF LOW HEAT/COLD TRANSFER AND MULTI-CHAMBERED STRUCTURAL MEMBERS |
|
| FLANGES & TRIM | EXTERNAL FLANGES FOR REHAB OR NEW CONSTRUCTION INTERNAL TRIM FOR INSTALLATION |
|
| COLONIAL MUNTINS | INSTALLED BETWEEN THE GLASS |
|
| LIMITED WARRANTY | VINYL MEMBERS, HARDWARE & INSULATED GLASS.
|
|
| AVAILABILITY | DELIVERY BETTER-THAN-COMPETITIVE |
|
WINDOW CONSTRUCTION WINDOW TECH SYSTEMS' DOUBLE HUNG WINDOWS CONTAIN A FRAME, TOP & BOTTOM SASH ENCASING INSULATED GLASS UNITS, BALANCE SPRINGS, AND HARDWARE COMPONENTS. HARDWARE UNITS CONSIST OF ONE OR MORE LOCKS & KEEPERS AND TWO SASH RELEASE HOUSING UNITS. THE KEEPER IS ATTACHED TO THE BOTTOM RAIL OF THE UPPER SASH AND THE LOCK ALONG WITH THE SASH RELEASE UNITS ARE ATTACHED TO THE MEETING RAIL OF THE LOWER SASH. OPERATING THE SASH OPERATION OF THE TWO SASH FOLLOWS: 1. ROTATE THE HANDLE OF THE LOCK TO UNLOCK THE WINDOW. 2. BOTH SASH ARE FREE TO MOVE IN A VERTICAL DIRECTION. USE ONLY THE FORCE NECESSARY TO MOVE THE SASH TO PREVENT DAMAGE TO THE BALANCE SYSTEM AND SASH PARTS. 3. EACH SASH IS ATTACHED TO SPRING BALANCES, WHICH PERMIT THE SASH TO REMAIN STATIONARY IN ANY OPEN POSITION. 4. THE REVERSE PROCEDURE IS TO BE EMPLOYED TO LOCK THE TWO SASH. CLEANING PROCEDURE WINDOW TECH SYSTEM'S DOUBLE HUNG WINDOWS CONTAIN TILT-IN SASH, WHICH ARE DESIGNED TO BE CLEANED INSIDE & OUTSIDE FROM INSIDE THE HOUSE. 1. RELEASE THE LOCK AND RAISE THE LOWER SASH TO 4 TO 6 INCHES. 2. SLIDE BOTH LATCHES OF SASH RELEASE UNITS TOWARD CENTER OF WINDOW TO RELEASE THE SASH. 3. TILT-IN THE LOWER SASH. 4. LOWER THE UPPER SASH UNTIL ITS BOTTOM RAIL IS ABOUT 3 INCHES ABOVE THE RAIL OF THE LOWER SASH. 5. TILT-IN THE UPPER SASH. 6. CLEAN THE EXTERIOR SURFACES OF BOTH TILT-IN SASH. 7. TILT BOTH SASH INTO FULL UPRIGHT POSITION. SLIDE MEETING RAIL LATCHES INTO THEIR CLOSED POSITION. BOTH SASH NOW ARE POSITIONED TO OPERATE VERTICALLY FOR OPENING AND CLOSING. 8. CLEAN THE INTERIOR OF BOTH SASH. 9. LOCK THE CLOSED SASH. |
||
MODEL SERIES |
STYLE |
CLASS |
| 6000 | HOR SLIDER/FIXED |
COMMERCIAL |
| 7000 | DOUBLE HUNG//FIXED |
COMMERCIAL |
| 8000 | DOUBLE HUNG//FIXED |
HVY COMMERCIAL |
| 9000 | DOUBLE HUNG//FIXED |
HVY COMMERCIAL |
| FEATURE | FUNCTION |
BENEFITS |
| COMPETITIVE PRICING | MATCHING PRICES FOR EQUIVALENT QUALITY & PERFORMANCE WINDOWS |
|
| HIGH PERFORMANCE RATINGS | CONFORM WITH STRUCTURAL, WATER, AIR & THERMAL REQUIREMENTS OF THE GOVERNING AAMA & ASTM SPECIFICATIONS |
|
| THERMAL PERFORMANCES | IMPROVED WITH THERMAL BARRIERS IN FRAMES & SASH MEMBERS INCREASED WITH LOW E-GLASS & ARGON GLAZED SASH INDICATED BY NFRC TESTING |
|
| CUSTOM MANUFACTURED | WINDOW SIZES CONFORM WITH OPENING SIZES |
|
| STRENGTH & RIGIDITY OF ALUMINUM MATERIAL | OVER 3 TIMES STRONGER AND 20 TIMES MORE RIGID THAN VINYL OVER 40 TIMES STRONGER AND 7 TIMES MORE RIGID THAN WOOD |
|
| STABILITY & DURABILITY | RESISTS SWELLING, SHRINKING, SPLITTING AND CRACKING OVER MANY YEARS OF WEAR |
|
| PAINTED FINISH | THERMOSET ACRYLIC ENAMEL AND ANODIZED COATINGS |
|
| FLANGES & TRIM | EXTERNAL FLANGES FOR REHAB OR NEW CONSTRUCTION INTERNAL TRIM FOR INSTALLATION |
|
| COLONIAL MUNTINS | LOCATED BETWEEN THE GLASS INSTALLED EXTERNALLY ON THE GLASS |
|
| LIMITED WARRANTY | ALUMINUM MEMBERS, HARDWARE & INSULATED GLASS.
|
|
| AVAILABILITY | DELIVERIES BETTER-THAN-COMPETITIVE |
|
WINDOW CONSTRUCTION WINDOW TECH SYSTEMS' DOUBLE HUNG WINDOWS CONTAIN A FRAME, TOP & BOTTOM SASH ENCASING INSULATED GLASS UNITS, BALANCE SPRINGS, AND HARDWARE COMPONENTS. HARDWARE UNITS CONSIST OF ONE OR MORE LOCKS & KEEPERS AND TWO SASH RELEASE HOUSING UNITS. THE KEEPER IS ATTACHED TO THE BOTTOM RAIL OF THE UPPER SASH AND THE LOCK ALONG WITH THE SASH RELEASE UNITS ARE ATTACHED TO THE MEETING RAIL OF THE LOWER SASH. OPERATING THE SASH OPERATION OF THE TWO SASH FOLLOWS: 1. ROTATE THE HANDLE OF THE LOCK TO UNLOCK THE WINDOW. 2. BOTH SASH ARE FREE TO MOVE IN A VERTICAL DIRECTION. USE ONLY THE FORCE NECESSARY TO MOVE THE SASH TO PREVENT DAMAGE TO THE BALANCE SYSTEM AND SASH PARTS. 3. EACH SASH IS ATTACHED TO SPRING BALANCES, WHICH PERMIT THE SASH TO REMAIN STATIONARY IN ANY OPEN POSITION. 4. THE REVERSE PROCEDURE IS TO BE EMPLOYED TO LOCK THE TWO SASH. CLEANING PROCEDURE WINDOW TECH SYSTEM'S DOUBLE HUNG WINDOWS CONTAIN TILT-IN SASH, WHICH ARE DESIGNED TO BE CLEANED INSIDE & OUTSIDE FROM INSIDE THE HOUSE. 1. RELEASE THE LOCK AND RAISE THE LOWER SASH TO 4 TO 6 INCHES. 2. SLIDE BOTH LATCHES OF SASH RELEASE UNITS TOWARD CENTER OF WINDOW TO RELEASE THE SASH. 3. TILT-IN THE LOWER SASH. 4. LOWER THE UPPER SASH UNTIL ITS BOTTOM RAIL IS ABOUT 3 INCHES ABOVE THE RAIL OF THE LOWER SASH. 5. TILT-IN THE UPPER SASH. 6. CLEAN THE EXTERIOR SURFACES OF BOTH TILT-IN SASH. 7. TILT BOTH SASH INTO FULL UPRIGHT POSITION. SLIDE MEETING RAIL LATCHES INTO THEIR CLOSED POSITION. BOTH SASH NOW ARE POSITIONED TO OPERATE VERTICALLY FOR OPENING AND CLOSING. 8. CLEAN THE INTERIOR OF BOTH SASH. 9. LOCK THE CLOSED SASH. |
||
Designed & Maintained by Production House Studios
